Usb Connection - WOXTER X200 Manual De Usuario

26
User manual Woxter X100
Skill: in any application programs, you can press homepage key to return
homepage interface.
Custom homepage interface
Change desktop wallpaper
» Press blank region on the homepage interface to pop up the menu.
» When the menu popping up, choose source of homepage interface
wallpaper you want to change.
» After clicking source of wallpaper, click picture you want, and then
select "setting wallpaper".
Figure 3-2
Figure 3-3
>> woxter.es

3.6 USB connection

Storage setting of Woxter X200
» Before transmitting document, you must set storage mode for your
tablet firstly:
» Connect Woxter X200 with computer by using USB transmission line.
Notice bar will show the notice prompt.
» Click status bar, options of status bar show.
» Among options of status, click to choose USB connected, then click to
open USB storage device.
» At this time, USB has already been connected.
Figure 3-4
Copy the document to storage card
» Connect Woxter X200 and computer together with USB cable.
» After setting according to storage of Woxter X200, connect with com-
puter successfully.
» Open your computer, in my computer; examine content in "removable
disk (x)".
» Find the document you want to copy, copy it to "removable disk(x)".
» After completion of copying, click "safely remove hardware" in taskbar
of your computer to unload.
Content of Woxter X200 storage device
» NAND FLASH storage device, space for Woxter X200 to store document
itself.
» TF removable memory card.
» The two above-mentioned storage devices both can be visited through
connection with your computer with USB.
27
English
>> woxter.es