Preparing; Preparing The Camcorder - Sony MPK-DVF2 Manual De Instrucciones

Preparing

1

Preparing the camcorder

The DCR-TRV9E is the model used for illustration purposes. Otherwise, the model
name is indicated in the illustrations. Any differences in operation are clearly indicated
in the text, for example, "DCR-TRV9E only".
For details, please refer to the operating instructions supplied with your camcorder.
(1) Remove the lens cap, shoulder strap, conversion lens or filter from the
camcorder.
(2) Attach a charged battery pack.
(3) Insert a cassette tape.
(4) Attach the reflex prevention ring to the tip of the lens.
for DCR-TRV7E/TRV9E
for DCR-TRV8E/TRV10E
for DCR-TRV890E/TRV900E : disuse
(5) Attach the camera mounting shoe A (for DCR-TRV7E) or the camera mounting
shoe B* (for DCR-TRV8E**/TRV9E/TRV10E**/TRV890E/TRV900E).
Remove the metal part from the camera mounting shoe B and firmly attach the
screw plate until the catch on the reverse side of the camera mounting shoe B
clicks into place.
For DCR-TRV8E/TRV9E/TRV10E/TRV890E/TRV900E only, connect the A/V
connecting cable of the camera mounting shoe B to the camcorder's AUDIO/
VIDEO jack.
(6) Adjust the camcorder.
Cancel the following functions: BACK LIGHT, NightShot, PROGRAM AE and
picture effect.
Camera
mounting
shoe A
Camera
mounting
shoe B
* *Use the spacer supplied when you attach the camera mounting shoe B.
: ø 37 mm (large)
: ø 30 mm (small)
DCR-TRV7E
1 DCR-TRV9E
2 DCR-TRV890E/TRV900E
3 DCR-TRV8E/TRV10E
Spacer
Camera mounting
shoe B
Screw plate
* To attach the camera mounting shoe B
Attach the screw plate to the camera
mounting shoe B.
1
2
Installing position of the screw plate
3
Installing position of the screw plate
GB
7
-GB