Wagan Tech ELITE 200W PRO Manual De Usuario página 7

approximately twice the continuous load, but some appliance startup loads can
be as high as eight times the continuous load.
The inverter will automatically shut down in the event of an output overload so
there is no danger of damaging either the inverter or the equipment. When the
red LED indicator is lit, the inverter is signaling a fault.
Maximum Power from Vehicle Accessory Sockets
Most vehicle accessory sockets that are controlled through a vehicle's ignition
switch are fused at 15 amps. This limits inverter output to approximately 180
watts.
To Power 200 Watt Appliances:
1. For temporary use, connect a battery clip adapter cord (not included) to
the inverter and follow the procedure located under the "Connecting the
Inverter" section.
2. Install a separate fused DC accessory socket wired to the vehicle's battery.
Fuse this circuit at 20 amps.
There is no danger in leaving the inverter directly wired to the battery if the
inverter is turned OFF after each use. The inverter will shut off when the vehicle's
battery level drops down to 9.5 volts to protect the battery from draining
completely.
Wagan Tech and wagan.com are trademarks of Wagan Corporation.
User's Manual—Read before using this equipment
©2019 Wagan Corporation. All Rights Reserved.
6