Technical Data - Macrom Syn Power 4.050 Manual De Instrucciones

Power IHF 202
RMS Power at (12.5 Volts DC)
Front/Rear at 1 kHz < 0.08 % THD at 4 Ohm
Front/Rear at 1 kHz < 0.5 % THD at 2 Ohm
Front/Rear at 1 kHz < 0.5 % THD Mono at 4 Ohm
Dynamic Power at (14.4 Volts DC)
Front/Rear at 1 kHz < 0.08 % THD at 4 Ohm
Front/Rear at 1 kHz < 0.5 % THD at 2 Ohm
Front/Rear at 1 kHz < 0.5 % THD Mono at 4 Ohm
High pass, Front and Rear
Low pass, Front and Rear
Crossover slope
Response in frequency +/- 1 dB
Total harmonic distortion
Weighted IHF A Signal-Noise Ratio
Input sensitivity - Impedance
Loudspeaker impedances
Stereo
Mono
Power supply
Weight
Dimensions
Due to the continual incorporation of improvements in this product, the characteristics and
design may be subject to variation without prior notice.

TECHNICAL DATA

10
500 W
4 x 45 W
4 x 80 W
2 x 140 W
4 x 60 W
4 x 90 W
2 x 180 W
(30-600)Hz
(30-600)Hz
12 dB/Octave
10 - 50.000 Hz
0.08%
> 90 dB
200-4000 mV/22 kOhm
min. 2 Ohms
min. 4 Ohms
14.4 V DC
(11 - 16 V permissible)
3,9 kgrs
212(i) x 65(h) x 355(d) mm