Specifications - MTD YM132 Manual Del Operador

SPECIFICATIONS

MOTOR
Motor type...........................................................................................................................................A.C.,120 Volts Electric
Operating RPM............................................................................................................................................. up to 7,400 rpm
On/Off Switch ............................................................................................................................................................. Trigger
Amperage................................................................................................................................................................ 5.2 amps
DRIVE SHAFT AND CUTTING HEAD
Drive Shaft Housing..........................................................................................................................................Steel, EZ-Link
Unit Weight (With cutting attachment, cutting attachment shield and D-handle) ...........................................13 lbs. (5.9 kg)
Cutting Mechanism ................................................................................................ SpeedSpool ® Dual String Cutting Head
Line Spool.............................................................................................................................................. Bump Line Releaser
Line Spool Diameter .................................................................................................................................3 inches (76.2 mm)
Trimming Line Diameter ........................................................................................................................... 0.080 in (2.03 mm)
Cutting Path Diameter.................................................................................................................................... 15 in (381 mm)
15