MAC Audio MPS 501 Notas Importantes Sobre La Instalación página 28

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Selecting and saving stations manually
Hint: Before beginning to tune in stations manually, obtain the available DAB / DAB+ stations
channel / frequency information for your area.
Switch on the appliance.
Press SOURCE button on the remote control or SOURCE button on the appliance repeatedly
to choose DAB mode. [FULL SCAN] is shown in the display.
Press the TUNE- / TUNE+ buttons until [MANUAL] is shown in the display. Press
Now you will see 5A 174.928MHz in the display.
Press the TUNE- / TUNE+ buttons to display a particular channel / frequency, the display will
show the channels from SA to 13F and the associated frequencies.
When the desired channel is displayed, press the
displayed. To add the channel, press the
Add additional channels in the same way and then press the MENU button to exit manual
tuning mode.
The radio will return to the first station and the new stations will be added.
Use the TUNE- / TUNE+ buttons to move through the stations available and press the
button to listen to the station.
Note: Up to 30 stations can be saved.
Auto-scan and store preset stations
Switch on the appliance.
Press SOURCE button on the remote control or SOURCE button on the appliance repeatedly
to choose DAB mode.
Press the MENU button. [FULL SCAN] is shown in the display.
Press the
button and the unit starts scanning DAB / DAB+ stations around your area.
Scanning O is shown in the display.
Once the scan is completed, the radio returns to play the previously-selected station or first
station on the station list.
Use the TUNE- / TUNE+ buttons to move through the stations available and press the
button to listen to the station.
Reset DAB Settings
Switch on the appliance.
Press SOURCE button on the remote control or SOURCE button on the appliance repeatedly
to choose DAB mode.
Press the MENU button. [FULL SCAN] is shown in the display.
Presses the TUNE- / TUNE+ buttons repeatedly until [SYSTEM] is displayed then press the
button to confirm, now [RESET] will be displayed.
Reset DAB settings
Press the
button [RESET N] will be displayed, use the TUNE- / TUNE+ buttons to toggle to
[RESET Y] and then press the
Once the reset is completed, the unit will then automatically perform a full scan. All stored
stations will be lost during reset.
button again.
button to start the reset process.
28
button and the signal strength will be
to confirm.

Publicidad

Tabla de contenido
loading

Tabla de contenido