Safety And General Information; Product Description - BVA Hydraulics P8701 Manual De Instrucciones

Tabla de contenido

Idiomas disponibles

Save these instructions. For your safety, read and understand the information contained within. The owner and operator shall have an

understanding of this product and safe operating procedures before attempting to use this product. Instructions and safety information

shall be conveyed in operator's native language before use of this product is authorized. Make certain that the operator thoroughly

understands the inherent dangers associated with the use and misuse of the product. If any doubt exists as to the safe and proper use

of this product as outlined in this factory authorized manual, remove from service immediately.

Inspect before each use. It is recommended that, prior to each use, an inspection be done by qualified personnel and that any missing

or damaged parts, decals, warning/safety labels or signs be replaced with factory authorized replacement parts only. Any pump that

appears to be damaged in any way, is worn, leaking or operates abnormally shall be removed from service immediately until such time

as repairs can be made. Owners and operators of this equipment shall be aware that the use and subsequent repair of this equipment

may require special training and knowledge.

BVA Hydraulic Hand Pumps are engineered to meet most industrial standards for performance and safety. These pumps, P8701 and

P8701M have a unique two-stage hydraulic circuit which allows quick displacement of hydraulic fluid under no load conditions and easy

pumping in loaded conditions. These lever operated pumps supply compressed hydraulic fluid to compatible applications i.e. rams,

presses, spreaders, compactors and crimping machines, anywhere that 10,000 PSI of fluid pressure is needed. Special skill, knowledge

and training may be required for a specific task and the product may not be suitable for all the jobs described above. Unsuitable

applications would include applications that call for a device to move, level or support persons, animals, hazardous materials, mobile

homes/dwellings in general, mirrors and/or plate glass, and/or to connect/secure hatches, components, etc. between bulkheads. The

user must ultimately make the decision regarding suitability of the product for any given task and assume the responsibility of safety for

himself/herself and others in the work area.

WARNING: Always check connections before using. Alteration of these products is strictly prohibited. Use only those adapters

and attachments provided and approved by the manufacturer.

WARNING: To reduce the risk of personal injury and/or property damage, ensure that the rated working pressure of each pressurized

attachment be equal to or greater than the rated working pressure developed by the hydraulic pump

Vent Screw

Carrying

Handle

Support

Frame

Figure 1 - Model P8701 Components