English
P40X006
1. Vacuum Head (PRO900)
2. Brushes
3. Wheels
4. Vacuum Head (PRO1500)
P41X200
5. Universal Vac Head Adapter
P40X002
6. Nose Cap
P40X022XF
7. Multi Layer filter bag
8. Pool Blaster PRO Shell
Specifications
Battery charger Input.........................................................................110-240V-50/60HZ, 0.3A Maximum
Battery charger Output.......................................................................................................12.6V,
Water temperature range................................................... Maximum 96°F, (35°C) Minimum 40°F, (5°C)
Operation Depth........................................................... Maximum 12 ft. (3.5 m), Minimum 10 in., 0.25 m
Only use the battery charger supplied with the cleaner.
A
Charging Your Cleaner
Initial Charge 4 Hours
Recharging (After Complete Discharge) 4 Hours
B
Adding the Brushes
C
Filter Assembly
D
Attaching the Vacuum Head
(Figure D.1 PRO900)
(Figure D.2 PRO1500)
Brushes
Brushes are added to the vacuum head.
(Figure B)
Different configurations are available. (6 Brushes Total)
LC099-3S-US-EU
9. Battery Charger & EU Adapter
10. Spring Clip
LB003S2P-C
11. Battery Pack
P40X003
12. Motor Box Assembly with Cap
P40X022SS
13. Sand and Silt Bag
P40X022AP
14. All Purpose Filter Bag/Seal Ring
PROW070
15. Shoulder Strap
1.A
Shallow Water Hose Attachment (part No: P30X881)
To purchase, contact your retailer or call us at (732)967-9888.
E
Attaching the Pool Pole
F
Turning the Cleaner On and Off
G
Maintenance
Long Term Storage
Remove the Battery Pack from the charger before storage.
Always clean the Nose Cap and Filter Bag before storing.
Always store and charge your cleaner in a cool, dry indoor shelter.
Recharge the cleaner for 4 hours after each month of inactivity.
Cleaning the Filter Bag
You should remove and clean the Filter Bag following each use.
(Figure G.1)
Don't scrub the bag against itself while rinsing it. (Figure G.2)
6
ADDITIONAL PARTS AVAILABLE:
Car Charger part No: LCO99-3S-CR)