Honeywell RTH111 Serie Guía De Instalación Rápida página 6

Quick Installation Guide

Mount New Wallplate
1) Loosen the locking screw at the bottom of the
thermostat. Note that the screw is captive and
cannot be removed from the wallplate.
2) Separate the thermostat from the wallplate as per
Figure 1.
3) Position the wallplate against the wall and mark
hole positions with a pencil.
NOTE: Levelling is for esthetics only and will not
affect the performance of the thermostat.
4) Drill holes at the marked positions and insert
supplied wall anchors.
5) Pass the wires through the large opening located
at the bottom center of the wallplate as per
Figure 2.
6) Secure the wallplate to the wall with supplied
mounting screws as per Figure 3.
7) Connect the wires to the terminals.
Figure 1
Figure 2
4
Figure 3
4.