Saving And Restoring All The Data; Writing And Reading Of Programming Data - Sharp XE-A505 Manual De Instrucciones

Tabla de contenido

Publicidad

Saving and Restoring All the Data

5
Set the mode switch to the PGM position.
Saving (writing) all the data
s
Restoring (reading) the saved data
s
* The message "ACCESSING CARD" will appear and stay on the display until all data is completely written or
read. When writing or reading is finalized, the message "SD FINAL" will be printed. In case an error occurs, a
corresponding error message will be printed.
If you save all the data by using an SD memory card that contains some data, the existing data will
be erased and replaced with newly saved data. If you need the existing data, use another SD
memory card.

Writing and Reading of Programming Data

6
Reading the graphic logo data
Set the mode switch to the PGM position.
s
* The message "ACCESSING CARD" will appear and stay on the display until all data is completely read. When
reading is finalized, the message "SD FINAL" will be printed. In case an error occurs, a corresponding error
message will be printed.
72
144
@
148
@
145
@
The comfirmation message is printed.
To execute
s
1
To cancel
The comfirmation message is printed.
To execute
s
1
To cancel
The comfirmation message is printed.
To execute
s
1
To cancel
*
A
l
*
A
l
*
A
l

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido