Storage/Maintenance; Wiring Diagrams - Pinnacle Protemp PT-40-GFA Manual De Usuario E Instrucciones De Funcionamiento

Always disconnect the heater from the LP cylinder
before putting the heater into storage. If for any
reason the heater is to be stored indoors, the tank
MUST be disconnected from the LP cylinder, and
the cylinder stored outdoors in a well-ventilated
area, out of the reach of children, and in accor-
dance with the Standard for Storage and Handling
of Petroleum Gases, ANSI/NFPA 58 - latest edi-
tion and Natural Gas and Propane Installation
Code, CSA B149.1. The plastic valve plug or
valve cover supplied with the cylinder must be
re-installed on the valve to protect the fitting from
damage.
© 2018 Pinnacle Climate Technologies, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR
®
STORAGE / MAINTENANCE

WIRING DIAGRAMS

Figure 6
60V-GFA / 125V-GFA / 150V-GFA
WHILE CONNECTED TO A POWER SOURCE
NOTE: Installation and repair of this heater
should be done by a qualified service person.
ALWAYS be sure to follow proper maintenance
procedures. This should include cleaning the in-
side of the heater once a month and checking the
spark gap at least once a heating season. Re-gap
the terminals to 0.160" (4mm)
DANGER
other gas or oil burning appliances.
40-GFA
9 Propane Forced Air Heater User's Manual
Never store an LP
cylinder inside of a
building or near any