Publicidad
Idiomas disponibles
Idiomas disponibles
1. Plastic dust cover.
2. Turntable.
3. Adapter - Use this when playing 45rpm records with cut out centres.
4. Tone arm lift lever.
5. Selection of built-in speakers or output BT Connection speakers.
6. Speed selection - Three speed for choice: 33.3, 45, 78 rpm.
7. Tone arm.
8. Ceramic cartridge with diamond needle.
9. Full range loud speaker.
10. Power & volume knob with LED light.
11. USB slot.
12. SD slot.
13. Skip up button.
14. Play or Pause button.
15. Skip Down button.
16. Mode: to select USB/SD or LP songs.
17. BT Connection reset button.
18. RCA output-red for R channel.
19. DC power supply cord.
Initial set-up
Ensure that the mains voltage of your home corresponds to the
operating voltage of the unit. Your unit is ready to be connected to
a mains voltage of 230V/50Hz.
Amplifier connection (if required)
Whilst you can listen to music using the built in speakers, you may
still wish to connect it to your existing Hi Fi system. Connect the
audio plugs to the AUX input on your mixer or amplifier using an
RCA cable (not supplied).
• Red plug into R/H channel input.
• White plug into L/H channel input.
Pg. 4
Publicidad
