Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Introduction
-
The 12 VDC LED amplifier for RGB LED strips allows the signal to reach the whole
LED strip, so the power flows through the strip without any voltage along its
length. It has one input and one output jack to join two LED strips and input and
outputs for the desired power source.
5
Specifications
The specifications of this amplifier include:
6. Input polarity protection.
7. Controls up to 15 metres of LED strips or other LED device.
8. Multi-level, with input power source polarity protection.
9. 2 signal input/output connectors and 2 for power input/output.
10. Resistant to radio frequency interference.
Technical Parameters
Supply Voltage
Current
Output Channels
Output Power
Type of Output
Protections
Working Voltage
Weight
12VDC
4ª * 1 Canal
3
144W (12VDC)
Constant Voltage
Polarity Inversion/Overvoltage
/Overcurrent/Short Circuit
-20º + 60ºC
92G
6
Publicidad
