Toto THU343 Manual De Instrucciones página 7

INSTALLING TOTO WASHLET
Follow the instruction to install the Washlet on the toilet per manual provided with
the product.
An installation kit (p/n: THU383) is required to install the water supply connection.
(Stop Valve, Reducer & Cap).
Follow the diagram below to install the components. Use tefl on tape (not
provided) as sealant between the joints. The length fo the nipple will vary based on
the thickness of the wall panel.
Connect the Washlet connection hose (supplied with Washlet) to the junction valve
and the Washlet.
Warning: After installing the components, check all connections for any leak.
½"Nipple
(Not Supplied)
Water Supply
from System
Junction Valve
(supplied with
Washlet
15/16"NPT
Cap
®
½"FIT Angle
Stop Valve
1/2"MIP x
15/16" NPT
Reducer
Washer
Washer
7
To
Washlet