Before You Start; Assembly - Echo BCLS-510ES Manual De Instrucciones

Before you start

Assembly

Read the operator's manual carefully to ensure that you assemble the product correctly.
Using a product that has been incorrectly assembled could lead to an accident or serious injury.
1. Bolt M5×20
1. Handle support
2. Adjustable
1. Right handle
2. Bracket
1. Wire end
2. Nuts
WARNING
3. Left handle
4. Bolt M5×35
3. Bolt M5×25
4. Wire fixing clips
3. Carburettor
Before you start
Operation shaft assembly
Stand the engine upright on a level surface.
Fit the operation shaft ensuring that it is correctly engaged.
Tighten bolts (M5×20) to fasten the operation shaft.
U-handle assembly
Install the left handle in the handle support and fix it by lightly
tightening bolts (M5×35) .
Adjust inclination of handle to adequate position (easy to op-
erate) and firmly tighten bolts (M5×35).
Install the right handle in the bracket.
Position the handle in comfortable operating position and
tighten bolts (M5×25).
To eliminate loosening of throttle wire fix it to shaft tube (2
places) with wire fixing clips.
After assembly, adjust the play of wire end on carburettor
side to 1 mm - 2 mm.
16
CAUTION