Installation; General Information; Transport, Handling, Unpacking, Location - BERG MERCHANDISER Serie Manual De Instrucciones

INSTALLATION

2.1 General in formation

2.2 Transport, handling, unpacking, location.

2.3 Intended use and restrictions.
2.4 Manufacturer's identification label description.
2.5 Installation and assembly.
2.6 Connections

2.1 General information

You can find in you equipment the following symbols, or stickers to identify some type of warnings or
useful information about your equipment.
2.2 Transport, handling, unpacking, location
Upon receiving your new BERG Merchandiser, check the package and the machine for any damages
that may have occurred during transportation. Visually inspect the exterior of the package, if damaged,
open and inspect the contents with the carrier. Any damage should be noted and reported on the
delivering carrier's receipt.
In the event that the exterior is not damaged, yet upon opening, there is concealed damage to the
equipment notify the carrier immediately. Notification should be made verbally as well as in written form.
Request an inspection by the shipping company of the damaged equipment.
Retain all crating material until inspection has been made. Contact the dealer through which you
purchased the unit.
Check the compressor compartment housing and visually inspect the refrigeration package. Be sure
lines are secure and base is still intact.
2