Zodiac DC33 Manual Del Usuario página 4

Page 4
ENGLISH
Installation
Prepare the Pool
1. Manually vacuum the pool if excessive debris is present,
and make sure the pool filter and pump basket are clean.
2. Close the pool main drain line.
3. Adjust the return lines to blow downward to
ensure complete cleaning coverage.
• Loosen the fitting lock ring
• Redirect the eyeball downward
• Retighten the lock ring
If the return fitting cannot be adjusted, it MUST
be replaced with a Zodiac return line diverter [part #W90153 for 1 ½ in. (3.8 cm), #W90155 for 2 in.
(5 cm) or #W24100 for pools without return fittings].
Assemble the Hose
The hoses are fitted with easy twist-lock connectors. Push and twist the connectors on each hose section until they
lock into position with a clicking sound.
1. Connect enough hose to reach the farthest point of the pool; then add two (2) hose sections.
2. Position the hose weight at the end of the first hose section, about 39 in. (1 m) from the cleaner.
Skimmer or
Dedicated Suction
Cleaner Line
|
Zodiac DC33 Pool Cleaner Owner's Manual
®
2 Hose
Sections
from cleaner
Hose
Weight
39" (1m)
from cleaner
Skimmer or
Dedicated Suction
Cleaner Line
Hose
Weight
39" (1m)
2 Hose
Sections