Chronos Manufactures André Belfort 7810 Le Commandant Manual De Instrucciones Y Garantía página 9

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 23
EN
Unscrew the crown by turning it counter-clockwise. Wind up the watch by
turning the crown between 30 and 40 times. Pull the crown carefully to
position 2 and set the watch to 7 o'clock. You may set the current day with
button A. With button B you may set the month. Push the crown carefully
to position 1 and set the date by turning the crown counter-clockwise. Pull
the crown carefully to position 2 again and set the red hour hand C for the
second time zone by turning the crown clockwise. Set the current time by
turning the crown counter-clockwise. The indicator in the middle (1 – 24) is
the 24 hour display. Then press the crown back in and bolt it by turning it
clockwise. For months with less than 31 days, the date must be changed
manually at the end of the month.
Important: Never set the date and/or the day between 8 pm and 4
am. The date changing mechanism is active in this period and any
exterior intervention can damage the movement. If it is necessary
to set the date during that time period, first change the time to any
time outside it, set the date and then reset the correct time. Please
press the button on your watch slowly and carefully to avoid dama-
ging the mechanism. When the warranty of your watch expires, we
recommend you to send it in for a revision to ensure its longevity. A
revision should optimally be conducted once a year to counteract
general wearout and to maintain the water-resistance of your watch.

Publicidad

Tabla de contenido
loading

Tabla de contenido