Phonic ZX2 PLUS V1 Manual Del Usuario página 8

20. Source Input
These are unbalanced line-level stereo RCA inputs. There are
three stereo music input sources. Each includes a gain control
with a range of -10 dB to +20 dB.
21. Source Link
The source link is an RS-232 D-type 9-pin connector that
distributes the three source inputs to the next compatible zone
mixer in the series. It also functions to receive the source input
from a ZX2 or ZX4 zone mixer. This function allows the source
inputs from one Phonic zone mixer to be used for many other
Phonic zone mixers while simplifying wiring schemes.
22. Paging Control
This RJ45 jack is used to connect a paging control to the ZX2 or
ZX4 mixers. The ZX2 and ZX4's paging control is optional.
23. Paging Microphone Input
This is a balanced XLR jack that is used to connect the output of
a paging microphone to the mixer. It includes a gain control with
a range of +15 dB to -15 dB. The paging microphone connects
to the mixer through an XLR input and the paging control. The
paging control allows users to select the destination of the
microphone's signal. The following is a diagram detailing how to
make the connection.
4
24
20 21 22
24. Phantom Power Switch
This switch will activate +48V DC of phantom power on the
paging microphone input, making the input suitable for use with
condenser microphones. Please check your microphone's user
manual for information on whether it requires phantom power or
not before you apply it to the microphone input.
23
ZX2 ZX2 / ZX4 / ZX4
PLUS V1 PLUS V1 PLUS V1 PLUS V1