Memory Function; Memory Recall - Lumiscope 1133 Manual De Instrucciones

11 MEMOrY FuNCTION

Memory recall

1. Model 1133 can store 120 sets of readings total (60 sets in "M1" and 60 sets in "M2") and will
automatically calculate the average of the last 3 readings for "M1" or "M2". When memory is full, the
oldest reading will be replaced by the newest. memory will not clear even if the batteries are removed;
fig. 11-1
2. after a measurement is finished, or when the device is in standby mode, the user can press
button "M1" or "M2" to recall memory. Press button "M1" to display the average value of the last
3 measurements as shown in Fig. 10-1;
fig. 11-2
3. Press button "M1" again, the device displays "01"; then after 1-2 seconds the latest measurement
will display as shown in Fig. 11-2;
4. Press button "M1" again, the device displays "02"; then after 1-2 seconds the second-to-the-last
measurement will display.
14