Onn ONA16TM010 Manual Del Usuario página 9

3. Drill two pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 2 3/4 in. (69.8 mm). Be sure to drill into the center of the studs.
4. Install wall plate using two lag bolts
16
CAUTION:
Avoid potential personal injury or property damage! Both lag bolts
movement of the wall plate
16
Go to STEP 3 on PAGE 12.
3
and two washers
17
. Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
2 3/4 in. (69.8 mm)
7/32 in.
(5.5 mm)
18 . Tighten the lag bolts only until they are pulled firmly against the wall plate.
MUST BE firmly tightened to prevent unwanted
17
4
16
18
17
9