Samson Airline 77 AL1 Manual Del Usuario página 15

Guided Tour - AL1 Presentation Transmitter
Samson AirLine
GAIN
5: Gain control (trimpot) - Use the supplied plastic screwdriver to raise or lower the input level sensitivity of the AL1 as required. See the
"Setting Up and Using Your AirLine System" section on page 17 in this manual for more information.
6: Mute switch - Move this switch in the direction of the arrow to mute the AL1; move it away from the arrow to unmute it and transmit
audio signal. Because the carrier signal remains during muting, no "pop" or "thud" will be heard. Note that turning this off does not turn
off the transmitter power—it is simply a way to temporarily mute the transmission of audio signal. If you don't plan on using the AL1 for
extended periods, turn it off power by using the power on-off switch (see #7 below). Be sure to mute the audio signal at your external mixer
or amplifier before turning the AL1 power on or off, or an audible pop may result.
7: Power switch - Move this switch in the direction of the arrow to turn power to the AL1 on; move it away from the arrow to turn power
off. (to conserve battery power, be sure to turn the AL1 off when not in use).
15