This appliance contains a Class 2 laser. NEVER direct the laser beam at people
or animals. NEVER look directly into the laser. The laser can cause serious eye
damage.
•
Do NOT direct the laser beam at strongly reflective material.
Reflected laser beams are also dangerous.
•
Do NOT use the appliance to determine the alternating voltage level in
exposed or non-insulated power cables.
•
Do NOT use the appliance as a substitute for a voltmeter.
Notes regarding inaccurate measurement results
The appliance does not always recognise all pipes and power cables.
The following conditions can contribute to inaccurate results:
– very thick walls
– weak battery
– deeply laid power cables or pipework
– shielded cables
– thick walls with thin pipes or power cables
– walls panelled with metal sheets
– very moist conditions
•
This appliance is not suitable for detecting power cables in circuits,
– which are isolated from the mains power supply.
– through which direct current flows.
– which are used for computer or telecommunications systems.
•
With this appliance pipework made of plastic or similar materials
cannot be detected, only pipework made of metal.
Interaction with batteries:
•
Leaking batteries can cause damage to the appliance. If you do not intend
to use the appliance for an extended period, remove the batteries.
•
Should the batteries leak, wear protective gloves and clean the battery
compartment with a dry cloth.
•
Keep batteries away from children. Children can put batteries into their
mouths and swallow them. Should a battery ever be swallowed, seek
medical attention IMMEDIATELY.
- 39 -