Functional Description; Important Safety Instructions For Battery Chargers - Black and Decker MATRIX BDCDMT112 Manual De Instrucciones

12V Max*
8
3
1

fUNCTIONAL DESCRIPTION

1. 12v Max* battery charger
2. 12v Max* battery
3. 12v Max* battery release button
4. 20v Max** battery charger
5. 20v Max** battery

IMPORTANT SAfETy INSTRUCTIONS fOR BATTERy ChARGERS

SAVE ThESE INSTRUCTIONS: This manual contains important safety instructions for battery chargers.
• Before using charger, read all instructions and cautionary markings on charger, battery pack,
and product using battery pack.
wARNING:
Shock hazard. Do not allow any liquid to get inside charger.
CAUTION:
Burn hazard. To reduce the risk of injury, charge only designated Black
& Decker batteries. Other types of batteries may burst causing personal injury and damage.
CAUTION:
Under certain conditions, with the charger plugged in to the power supply, the
charger can be shorted by foreign material. Foreign materials of a conductive nature such as,
but not limited to, steel wool, aluminum foil, or any buildup of metallic particles should be kept
away from charger cavities. Always unplug the charger from the power supply when there is no
battery pack in the cavity. Unplug charger before attempting to clean.
wARNING:
• DO NOT attempt to charge the battery pack with any chargers other than the ones in this
manual. The charger and battery pack are specifically designed to work together.
• These chargers are not intended for any uses other than charging designated Black & Decker
rechargeable batteries. Any other uses may result in risk of fire, electric shock or electrocution.
• Do not expose charger to rain or snow.
• Pull by plug rather than cord when disconnecting charger. This will reduce risk of damage
to electric plug and cord.
• Make sure that cord is located so that it will not be stepped on, tripped over, or
otherwise subjected to damage or stress.
9
7
10
2
12
6. 20v Max** battery release button
7. Forward/reverse slider
8. Variable speed trigger
9. Attachment release button
10. Bit holder
20V Max**
8
10
13
5
9
7
6
11
4
11. Drill/screwdriver attachment
12. Keyless chuck
13. Torque adjustment collar
Double-ended bit tip (not shown)
5