Mark MF 750 UP Manual De Uso página 5

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operating Instruction
1. After checking that all the parts are intact and complete, position the machine on flat.
2. Pour MARK fog liquid into the oil tank carefully and screw the cap. Please use the fog liquid designated by
MARK, otherwise it might do harm to the machine itself, also void the warranty.
3. Connecting the power cord. Before power on, make sure it is connected with the rated voltage.
4. Turn on the machine, it will immediately start heating up, the digital display will show "WARMING UP".
5. It takes about 4 minutes for MF 750 UP to heat up completely . The digital display will change to " A DDRG"
when it is ready. Press the on board fog button on the machine 's rear panel or the any button on the remote to
create fog. .
Instruction to digital display
1. MENU button: When it shows "HEAT", press "menu" button to enter the page "ADDR".
2. Up button: Increase the relevant value of each page
3.Down button: Decrease the relevant value of each page
4.Enter button: Enter or exit each page
LED color setting page
When it shows "CH1" , press ENTER button to set LED color under button one. Through UP and DOWN button,
user can realize the color setting. After finished setting, press ENTER again to exit to page CH1. The LED's color
could be set to OFF, 9 colors (Co1 -Co9) and change color automatically (rand).
MF 750 UP
- 3 -
User Manual/Manual de Uso
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido