Publicidad
Enlaces rápidos
CSA B125
ASME A112.18.1
ICC/ANSI A117.1
Models/Modelos/Modèles
6516728, 6216708
Series/Serie/Seria
Trevit
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
For easy installation of your
BRIZOt faucet you will need:
* To READ ALL the instructions completely before
beginning.
* To READ ALL warnings, care, and maintenance
information.
Para instalación fácil de su llave
BRIZOt usted necesitará:
* LEER TODAS las instrucciones completamente
antes de empezar.
* LEER TODOS los avisos, cuidados, e información
de mantenimiento.
Pour installer votre mélangeur BRIZOt
facilement, vous devez :
* LIRE TOUTES les instructions avant de débuter.
* LIRE TOUS les avertissements ainsi que toutes les
instructions de nettoyage et d'entretien.
12995.00
TWO HANDLE WALL--MOUNTED LAVATORY
t
AND KITCHEN FAUCETS
LLAVES DE AGUA DE DOS MANIJAS PARA
INSTALACIÓN EN LA PARED DE BAÑOS Y COCINAS
MÉLANGEURS MURAUX POUR ÉVIERS ET LAVABOS
6216708
You may need/Usted puede necesitar/
Articles dont vous pouvez avoir besoin:
1
6516728
07.04
Publicidad
Manuales relacionados para Brizo Trevi 6516728
Resumen de contenidos para Brizo Trevi 6516728
- Página 1 TWO HANDLE WALL--MOUNTED LAVATORY AND KITCHEN FAUCETS LLAVES DE AGUA DE DOS MANIJAS PARA INSTALACIÓN EN LA PARED DE BAÑOS Y COCINAS MÉLANGEURS MURAUX POUR ÉVIERS ET LAVABOS CSA B125 ASME A112.18.1 ICC/ANSI A117.1 Models/Modelos/Modèles 6516728, 6216708 Series/Serie/Seria Trevit Write purchased model number here. 6216708 6516728 Escriba aquí...
- Página 2 FAUCET INSTALLATION MAKE CONNECTIONS TO WATER LINES Install ½” hot and cold supply piping to the valve body. Construct a suitable stud brace for mounting of the valve body. Temporarily pull plaster guards from valve body. Do not discard plaster guards at Refer to the roughing--in dimensions located on the plaster guard sleeves on valve this time.
- Página 3 COMPLETE WALL FINISH MOUNTING WALL ESCUTCHEONS Complete finish wall with 1½” diameter holes for handle and spout shanks. Space Pull off plaster guards and discard them. hole centers 4” (100 mm) apart. Carefully slide the escutcheons over each sleeve of the valve body. Note: To ensure proper fit, do not oversize holes, beyond 1 ¾”.
- Página 4 MOUNTING HANDLES AND SPOUT FLUSH YOUR SYSTEM Handles : With hot / cold valves in closed position. Line up handles horizontal Turn on water supplies, if closed. with handle grips pointing outwards, press handle onto valve stem until a small Remove aerator (1) and turn faucet handles (2) to the full on position and flush water lines for one minute.
-
Página 5: Mantenimiento
MAINTENANCE MAINTENANCE SHUT OFF WATER SUPPLIES BEFORE SERVICING VALVE If faucet leaks at base of spout -- replace O--ring. (2). ASSEMBLY Unscrew the set screw underneath spout, by using a 3 mm Allen key. Pull off spout. If faucet leaks out of spout or under handle -- replace valve cartridge. (1). Replace O--ring on spout shank. - Página 6 RP36262s Aerator 6216708 Aireador Aérateur RP40110s Spout with aerator (9”) Caño con aireador (9”) Bec avec aérateur (9”) RP40111s Spout with aerator (6”) Caño con aireador (6”) Bec avec aérateur (6”) RP36269s Handle + colour marks Manija + marcaciónes de color Manette + marquage de couleur RP40112s Handle sleeve base &...
- Página 7 This warranty excludes all industrial, commercial and business usage, whose purchasers are parts may be obtained by calling 1--877--345--BRIZO (2749) (in the U.S. and Canada) or by hereby extended a five year limited warranty from the date of purchase, with all other terms of writing to: this warranty applying except the duration of the warranty.