Napa 6-1023 Manual De Instrucciones página 6

OPERATION
Intended Use:
This random orbital sander is designed for smoothing and sanding paint, fiberglass, wood, and body filler.
Assembly: Tightly mount the pad to the tool using the manufacturer supplied spanner wrench. Center abrasive
paper on pad and press firmly to ensure proper adhesion.
Use only a sanding pad, buffing wheel, or polishing bonnet with this tool. Do not use any grinding wheels, bur or
metal removing accesories with this tool. NEVER use an accessory having a maximum operation speed less than the
free speed of the sander in which it is being used.
When using a pad on a threaded arbor, make certain the flange nut is tightened securely (wrench supplied). Check
the tightness of the flange nut before operating to make certain it will not loosen during operation.
WARRANTY POLICY: This NAPA
PROFESSIONAL AIR TOOL, 6­023,
is warranted against defects in
material and workmanship for a
period of one () year from the
date of the original purchase. We
will replace any defective part or
unit which proves to be defective
in material or workmanship dur­
ing this one year period. In the
unlikely event a replacement
unit is req­uired during this one
year period, return the unit to
your local NAPA Auto Parts Store
for the free replacement. This
warranty does not cover damage
PLEASE REVIEW ALL WARNING INSTRUCTIONS PRIOR TO OPERATION. SAVE ThIS mANUAL fOR fUTURE REfERENCE.
6-1023
to tools rising from alteration,
abuse, misuse and does not cover
any repairs made by anyone
other than an authorized NAPA
PROFESSIONAL AIR TOOL
Service Center.
If service is req­uired after the
one year limited warranty, return
tools to any authorized NAPA
PROFESSIONAL AIR TOOL Service
Center, transportation prepaid.
Be sure to include your name,
address and phone number with
each tool.
6
S
pecificationS
Orbital Diameter: ......... 3/6" ( 5mm)
Free Speed: ......................2,000 RPM
Ave. Air Consumption: ......... 2.0 CFM
Sound Level: .......................... 96 dBA
Air Inlet : .............................../4" NPT
Min. Hose Size: ......................3/8" I.D.
Vibration: ...............................2.2 M/S²
Vacuum Type: ................ Non vacuum
Weight .....................................70 lbs
Rev. 10/24/07