Kamikaze KV 100 Manual De Uso página 74

ElEctrical PolE PrunEr
• The moving blade can be replaced now (9). Add grease to the fix blade in
the indicated position(10):
• Repeat the inverse procedure to reassemble the tool. During the
reassemble operation add grease to the blade pins.
• Between operation 5 and 4, move the blade by hand to evaluate the
smooth relative movement between the blades. If the movement is
difficult the locking nut has to be released by one step. If there is lateral
freeplay the locking nut has to be tightened of one step.
15.3 fixed blade replacement
• Follow the procedure at par. 15.3 for moving blade replacement up to point (9).
• Remove fixed blade screw (1) and pull out the fixed blade (2):
• Repeat the inverse procedure to reassemble the tool.
74
www.kamikazevolpi.com