CE DECLARATION OF CONFORMITY
This CE Declaration of Conformity is subject to compliance with the constraints and indications envisaged in the product warranty, as well as the correct installation by the appointed party in compliance
with the installation and laying instructions provided by VELOMBRA Srl.
Manufacturer:
VELOMBRA srl
Via Einstein 18 - 47122 FORLÌ - Italy
Model:
DEFENSE 11 manual/electric
DEFENSE 14 manual/electric
Serial number:
(see CE marking on product)
Production year:
(see CE marking on product)
Usage:
(see User manual - Original Instructions and
concerning Warranty)
The company hereby declares under its own responsibility that the foregoing product complies with the Directives indicated below:
INDICATION / CONDITIONS TO WHICH THE USAGE OF THE PRODUCT IS SUBJECT:
The VELOMBRA product is subject to installation on the customer's premises.
The Authorized Installer has to draw up and hand over the suitable DECLARATION OF CORRECT INSTALLATION AND CLASSIFICATION OF WIND RESISTANCE to the user, which testifies the correct installation,
in accordance with the instructions supplied by the manufacturer and applied in accordance with the state and morphology of the installation site and corresponding to the using conditions for which
it has been realized.
The Installer has to follow the reference instructions in the "INSTALLATION MANUAL" and "USER MANUAL".
The Installer fills out and signs the DECLARATION OF CORRECT INSTALLATION AND CLASSIFICATION OF WIND RESISTANCE, in accordance with the model in the USER MANUAL.
THE MANUFACTURER
I declare that the above described product conforms to the indications and requirements in the above mentioned Directives.
CHIEF EXECUTIVE OFFICER
Vittorio Bandini
(*) Directives applicable solely for products equipped with motorisation (see User manual).
(**) Wind Resistance Degree: the WRD was verified using supports for the installation with features as indicated in corresponding Loads data sheet in the Installation Manual.
28 of 70
REFERENCE DIRECTIVES applicable to the following CE Declaration of Conformity
- Electromagnetic Compatibility Directive 89/336/EEC (*).
- Machinery Directive 2006/42/EC (*).
- Low Voltage Directive 2006/95/EC (*).
The conformity has been verified with the aid of the following norms:
- Performance requirements including safety UNI EN 13561:2009.
- Wind resistance Degree: Beaufort 5 (**) (method as per UNI EN 1932:2002).
VELOMBRA SRL USER MANUAL DEFENSE
Rev. 7 - 06.2012