Cleaning And Maintenance - melitta LOOK THERM Instruciones De Uso

6. Timer Feature
The appliance is equipped with a TIMER feature. This
starts the brewing process at a time you programme.
• Prepare the appliance as described in point 5 'making
coffee', but without pressing the START button.
• To set the desired start time, hold down the TIMER
button . The first time you programme it the
display will show 00:00.
• Set the desired start time by repeatedly pressing
the h and m buttons . This goes faster if you hold
down the button.
• After letting go of the TIMER button the current
time will show after two seconds. The chosen start
time is saved until you set a different time or remove
the appliance from the power source.
• By briefly pressing the TIMER button  the timer
feature is activated for the next brewing process.
To show this the TIMER button  is illuminated
and the programmed start time shows briefly in the
display .
• The appliance automatically starts to make coffee at
the time you have set.
• As long as you do not remove the plug from the
socket or set a new start time, the previous start
time is saved.
• By briefly pressing the TIMER button  you can
deactivate the timer feature at any time. The light in
the TIMER button  goes off.
• If you want to make coffee before the start time you
have programmed, press the START button . The
TIMER feature will be deactivated.

7. Cleaning and maintenance

External cleaning
• The housing can be cleaned with a soft damp cloth.
• The jug lid, the filter insert and the
swivel filter  can be washed in the dishwasher.
Descaling:
Based on the water hardness level you have set
(see point 3) the descaling programme should be run
promptly after the CALC button  lights up.
• Follow the manufacturers instructions regarding
amounts and pour the descaler into the water tank.
We recommend using Melitta
Machines.
• Briefly press the CALC button , it will start to flash.
• The descaling process will now run automatically.
To remove even stubborn limescale the descaling
process takes 25 minutes. The remaining time is
shown in the display.
• Attention: Only by carrying out the descaling
process completely will all limescale deposits be
removed and the light on the CALC button will go
off. The descaling process should therefore not be
interrupted before it has run for the full 25 minutes.
• When the descaling process is completed the light
on the CALC button will go off. The appliance will
turn off automatically.
• At the end of the descaling process, the appliance
should be rinsed twice through, using the maximum
amount of water without coffee. This will remove
any remaining limescale deposits.
Anti Calc Filter Café
®
8. Notes on disposal
• Appliances labelled with this symbol
to European guidelines for WEEE (Waste Electrical
and Electronic Equipment).
• Electric appliances do not go in the household bin.
Dispose of the appliance in an environmentally
friendly way using suitable collection systems.
• Packaging materials are raw materials and can be
recycled. Please recycle them.
are subject
GB
9