Technical Specifications - EuroLite FF-1 Manual Del Usuario

Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device will be damaged, it has to be replaced by authorized dealers only in
order to avoid hazards.
If defective, please dispose of the unusable device in accordance with the current legal regulations.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Smoke-output:
Warm-up time:
Fluid consumption:
Output volume:
Tank capacity:
Dimensions (LxWxH):
Weight:
Fitting lamp:
Maximum ambient temperature t
Maximum housing temperature t
Fuse:
Please note: Every information is subject to change without prior notice. 05.02.2003 ©
230 V/50 Hz
600 W
approx. 2.3 m
approx. 4 min.
approx. 21 ml/min.
approx. 50 m³/min.
0.25 l
245 x 275 x 210 mm
4 kg
230 V/100 W G(X)-6.35
: 45° C
a
(steady state): 90° C
B
F 5 A, 250 V
22/40
51701897_V_1_0_2643.DOC