ASROCK K10N750SLI-WiFi Manual Del Usuario página 10

17. While CPU overheat is detected, the system will automatically shutdown.
Before you resume the system, please check if the CPU fan on the
motherboard functions properly and unplug the power cord, then plug it
back again. To improve heat dissipation, remember to spray thermal
grease between the CPU and the heatsink when you install the PC
system.
18. This motherboard supports ASRock AM2 Boost overclocking technology
for AM2 CPU. If you enable this function in the BIOS setup, the memory
performance will improve up to 12.5%, but the effect still depends on the
AM2 CPU you adopt. Enabling this function will overclock the chipset/CPU
reference clock. However, we can not guarantee the system stability for all
CPU/DRAM configurations. If your system is unstable after AM2 Boost func-
tion is enabled, it may not be applicative to your system. You may choose to
disable this function for keeping the stability of your system.
1 . 3 1 . 3 Minimum Hardware R Minimum Hardware R
1 . 3 1 . 3 1 . 3 Minimum Hardware R Minimum Hardware Requirement T Minimum Hardware R
Vista Vista Vista Premium 2008 and Basic Logo Premium 2008 and Basic Logo Premium 2008 and Basic Logo
Vista Vista TM TM Premium 2008 and Basic Logo Premium 2008 and Basic Logo
TM TM TM
For system integrators and users who purchase this motherboard and
plan to submit Windows
below table for minimum hardware requirement.
CPU
Memory
VGA
* After June 1, 2008, all Windows
minimum hardware requirements in order to qualify for Windows
2008 logo.
1 0 1 0 1 0
1 0 1 0
ASRock
equirement T equirement T
equirement Table for W equirement T
TM
® Vista Premium 2008 and Basic logo, please follow
Sempron 2800+
1GB system memory (Premium)
512MB system memory (Basic)
DX10 with WDDM Driver
with 128bit VGA memory (Premium)
with 64bit VGA memory (Basic)
® TM
Vista systems are required to meet above
K10N750SLI-WiFi Motherboard
able for W able for W indows indows
able for Windows able for W indows indows
® ® ® ® ®
® TM
Vista Premium