MCS Master B 130 Manual De Instrucciones página 15

IMPORTANT: READ AND UNDERSTAND THIS MANUAL PRIOR TO
en
ASSEMBLING, STARTING UP OR CONDUCTING MAINTENANCE ON THIS
it
HEATER. USING THE HEATER INCORRECTLY CAN CAUSE SERIOUS
de
INJURY. KEEP THIS MANUAL FOR FURTHER REFERENCE.
es
1. DESCRIPTION
This series of heaters is particularly suited to
fr
heating medium to large-sized rooms or areas.
nl
The series is divided into direct heaters and
indirect heaters.
pt
Direct heaters (PIC. 1-2) mix hot air with
combustion fumes. For this reason they are
da
particularly suited for outdoor environments or
fi
areas with high air renewal where there is a
need to heat up, defrost or dry.
no
Thanks to a heat exchanger, indirect heaters
(PIC. 3-4) separate combustion gases from the
sv
hot air released into the environment. This way
pl
it is possible to introduce a flow of clean hot
air in the area that needs to be heated up and
ru
direct exhaust fumes outside.
These heaters have been designed in line with
cs
the most recent safety, operating and duration
hu
criteria. The safety devices ensure the machine
always operates correctly.
sl
2. SAFETY INFORMATION
tr
WARNINGS
hr
!
IMPORTANT: This appliance is not
lt
suitable for use by persons (including
children) with reduced physical, sensory
lv
and mental capacities or with lack of ex-
et
perience or knowledge unless supervised
by a person responsible for their safety.
ro
Children must be supervised to make sure
they do not play with the appliance.
sk
bg
!
DANGER: Suffocation by carbon
monoxide can be fatal.
uk
The first symptoms of suffocation by carbon
bs
monoxide are similar to those of flu with
headache, light-headedness and/or nausea.
el
These symptoms could be caused by the
faulty functioning of the heater. IF THESE
zh
SYMPTOMS OCCUR,
IMMEDIATELY and have the heater repaired
by a technical service centre.
►►2.1. REFUELLING:
►2.1.1. Personnel appointed to carry out
refuelling must be qualified and fully fa-
miliar with this manual and current regu-
lations on how to refuel heaters safely.
GO OUTDOORS
►2.1.2. Only use the type of fuel specified
on the heater's identification plate.
►2.1.3. Before refuelling, turn off the heater
and wait for it to cool down.
►2.1.4. The fuel storage deposit tanks must
be located in a separate facility or build-
ing.
►2.1.5. All fuel tanks must be kept at a mini-
mum distance from the heater, in accor-
dance with current safety regulations.
►2.1.6. Fuel must be stored in areas where
the floor surface does not allow under-
neath dripping, or any other leakage
which may ignite the fuel.
►2.1.7. Fuel must be stored in accordance
with current safety regulations.
►►2.2. SAFETY:
►2.2.1. Never use the heater in areas with
petrol, paint solvents or other highly flam-
mable vapours.
►2.2.2. Comply with all local legislation
and current regulations when using the
heater.
►2.2.3. Heaters used near tarpaulins, cur-
tains or other similar covering materials
must be kept at a safe distance. It is ad-
vised to use fire-proof covering material.
►2.2.4. Only use heaters in well-ventilated
areas. Set-up a suitable open and venti-
lated area, with the purpose of introduc-
ing fresh air from outdoors, in compli-
ance with the current safety standards.
►2.2.5. Heaters must be powered only with
the correct voltage and frequency values
as specified on the heater's identification
plate.
►2.2.6. Only use suitable earthed exten-
sion cable.
►2.2.7. The recommended safety distanc-
es between heaters and flammable sub-
stances are: front output = 2,5 m; side/
top/rear output = 1,5 m.
►2.2.8. Avoid fire hazards by placing the
hot or functioning heater on a flat level
surface.
►2.2.9. Always keep animals at a safe dis-
tance.
►2.2.10. Disconnect the heater from the
main power supply when not in use.