Haier XQG65-11SU Manual Del Usuario página 25

XQG65-11SU -MANUAL 10/29/02 1:50 PM F/_'_ 26
2, Connect the hot and cold water inlet hoses to the hot and cold water faucet,
3. Connect the other end to their respective washer inlet located at the rear.
Note: Hot water needs to be at a temperature of at least 120°F - 140°F,
(49°C - 60°C) for the soap to dissolve and to avoid soap residue
remaining on clothes.
4, Install the drain hose into a drain pipe, The drain hose must be placed into a
drainpipe at least 1 1/2 inches in diameter or directly into a sink, Use the "goose
neck" to hold hose in place. To avoid possible water back up, the drain hose
must reach height of at least 31 1/2 inches minimum and 40 inches maximum. If
the sink is less than 37 1/2 inches in height, route drain hose through the clip on
the back of the machine,
Water Inlet Water Supply Hose
Hose Bend
Drain Hose
Goose Neck
Hose
24