LDLC M27 Manual Del Usuario página 42

INSTALLATION:
1. Align the Arm with the opening in the base.
2. Install the Arm on the base with the included screw.
3. Install the monitor on the arm: align and insert the two anchor tabs of the arm, on
the rear top of the screen, in the 2 slots provided for this purpose. Clip monitor and
arm together until you hear the click of the locking.
4. Vesa support snaps on the Arm, by aligning it, and then gently press it down
REMOVAL:
1. Carefully lift up and remove the VESA support.
2. To remove the screen from the arm, unlock the safety trigger located at the
bottom centre of the arm's stand.
3. Gently pull the stand from the monitor until they are unattached.
4. Remove the screw located under the base, then gently remove the stand
base.
Note:
 Place the Monitor face down on a soft and flat surface (blanket, foam, cloth, etc)
to Monitor while install and remove.
POWER SOURCE:
1. Make sure that the power cord is the correct type required in your area.
2. This LCD monitor has an Internal universal power supply that allows operation in
either 100/120V AC or 220/240V AC voltage area (No user adjustment is required.)
3. Connect the AC-power cord one end to your LCD monitor's AC-input socket, the
other end to wall-outlet.