Important Warnings; Cleaning And Disinfecting - Medicura m213A Manual De Instrucciones

Nebulizador de pistón
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

1 Piston compressor
2 Power cord
3 ON/OFF Switch
Dear Customer,
this nebuliser is a high quality device for inhalation therapy for asthma, chronic bronchitis, and other respiratory illnesses. This medical
device generates aerosols with variable characteristics to adapt to the patient's respiratory pathology and generating a medicinal mist of
particles that are small enough to reach even the deepest regions of your lungs and be of maximal benefit.The operation and usage of the
device is very straightforward. All common liquid medication can be used for inhalation therapy.Please read through these instructions
carefully so that you understand all functions and safety information. We want you to be happy with your m213A product. For any further
questions you may have, please ask your chemist or usual retailer.

IMPORTANT WARNINGS

This device may only be used for the purposes described in this booklet. The manufacturer cannot be held liable for damage caused
by incorrect application. This device is not suitable for anaesthesia and lung ventilation.This device should only be used with original
accessories as shown in these instructions. Do not use the device if you think it is damaged or notice anything unusual. Never open the
device. This device comprises sensitive components and must be treated with caution. Observe the storage and operating conditions
described in the «Technical Specifications» section. Protect it from: - water and moisture - extreme temperatures - impact and dropping
- contamination and dust - direct sunlight - heat and cold. Only use the medication prescribed for you by your doctor and follow your
doctor's instructions with regard to dosage, duration and frequency of the therapy.
All accessories should only be used by one person. Never bend the nebuliser over 60°.
– The unit should not be used in the presence of anesthetic mixture inflammable with air, oxigen or nitrous oxide.
– Device not protected against splashe.
– Keep the device away from splashes and water jets. In case of transportation or in the presence of possible water drips, use the bag
provided.
– In view of their length, the power cord and connection hose could constitute a strangulation hazard.
Ensure that children do not use the device unsupervised some parts are small enough to be swallowed.
Use of this device is not intended as a substitute for consultation with your physician.
PREPARATION AND USAGE OF THIS DEVICE
Prior to using the device for the first time, we recommend cleaning it as described in the section «Cleaning and Disinfecting».
1. Assemble the nebuliser kit 12. Ensure that all parts are complete.
2. Fill the nebuliser with the inhalation solution as per your doctor's instructions. Ensure that you do not exceed the maximum level.
3. Connect the nebuliser with the air hose 6 to the compressor 1 and plug the power cord 2 into the socket.
4. Switch the ON/OFF switch 3 to position «I» to turn on the device and place the mouthpiece 7 in the mouth or fit one of the face
masks over mouth and nose.
– The mouthpiece gives you a better drug delivery to the lungs.
– Choose between mouthpiece 7, nosepiece 10, adult 8 or child face mask 9 and make sure that it encloses the mouth and nose
area completely.
5. Breathe in and out calmly during the therapy. Sit in a relaxed position with the upper body upright. Do not lie down while inha-
ling. Stop inhalation if you feel unwell.
6. After completing the inhalation period recommended by your doctor, switch the ON/OFF switch 3 to position «O» to turn off the
device and unplug it from the socket.
7. Empty the remaining medication from the nebuliser and clean the device as described in the section «Cleaning and Disinfecting».

CLEANING AND DISINFECTING

Thoroughly clean all components to remove medication residuals and possible impurities after each treatment. The compressor 1 and
the air hose 6 should be cleaned with a clean, moist cloth.
Always wash your hands well before cleaning and disinfecting the accessories.
Do not expose the compressor to water or heat.
Replace the air hose for each treatment with a new patient or in case of impurities.
PISTON TYPE COMPRESSOR NEBULIZER
4 Air filter compartment
5 Nebjet Nebulizer
6 Air hose
EN
7 Mouthpiece
8 Adult face mask
9 Child face mask
6
10 Nosepiece
11 Replacing air filter
12 Assembling nebuliser kit

Publicidad

Tabla de contenido
loading

Tabla de contenido