Replacing The Battery - PeakTech 1610 Manual De Instrucciones

3. Connect the K-type probe into the meter adaptor and
measure the temperature of the apparatus or area required.
4. Read the temperature directly from the display.
5. To change the measuring unit from °C to °F press the
MODE-button to select the °F unit (P 1610 / P 1625).

7. Replacing the battery

WARNING! To avoid electrical shock, disconnect the test leads
and any input signals before replacing the battery. Replace only
with same type of battery.
This meter is powered by a NEDA type 1604 or equivalent 9 V-
battery. When the meter displays the battery symbol the battery
must be replaced to maintain proper operation. Use the following
procedure to replacing the battery.
1. Disconnect test leads from any live source, turn the rotary
switch to OFF and remove the test leads from the input
terminals.
2. The battery cover is secured to the bottom case by a screw.
Using a Philips-head screwdriver, remove the screw from
the battery cover and remove the battery cover.
3. Remove the battery and replace with a new equivalent 9 V-
battery.
4. Replace the battery cover and reinstall the screw.
Note: Batteries which are used up, dispose duly. Used up
batteries are hazardous and must be given in the for this being
supposed collective container.
-47-