Speaker Placement - M-Audio BX8 CARBON Guia Del Usuario

Speaker Placement

Placing the speakers is one of the most important
procedures in order to monitor sound accurately. To
monitor with the BX8 Carbons performing to their
maximum capability,
environment and correct placement are required.
Please refer to the following for correct BX8 Carbon
placement.
1. The two units and the listener should basically
align to form a regular triangle. Refer to the
following diagram.
2. Position the monitors so that the top of the
woofers are level with your ears in a normal
listening environment. Refer to the following
diagram.
3. Place the monitors vertically with the woofer on
the bottom. Placing the BX8 Carbon horizontally
is not recommended.
Remarks: DO NOT place any obstacles that may
block the flow of air in front or between the monitors.
Also remove reflective materials such as glass, mirrors
or metal from the monitoring environment. PLACE
THOSE MATERIALS AWAY FROM THE PATH OF THE
SOUND FROM THE BX8 Carbons.
Declaration for Always-On Products for Regulation (EC) No. 1275/2008:
To provide audio signal at the noise floor level, this studio monitor speaker product should be in the "always on" status for
terminal users to use. The requirement of a power management function as provided under point 2(d) of Annex II would be
"inappropriate for the intended use'' of the equipment. This product is an exception to the design requirements as provided
under Annex II, thus an "off," "standby" and/or "another condition" mode and a power management function is not
appropriate for its intended use. When not using this product, we suggest switching it off.
an appropriate listening
6