9
D
M
x6
EN: Attach bottom (D) to sides and back using six screws (M). Note: Three screws on bottom front (D) will be inserted after the front (E) is attached.
Attach hinge (H) onto back (B) using six screws (M).
FR:
ES:
11
L
1
C
EN: Lower liner (L) down and insert edges into notches on sides (C). Note: Make sure the drain tube on back of liner goes through the hole in the back
panel (See step 16). Attach small part of hinge to lid using six screws (M).
FR:
ES:
10
12
Notches
8
M
x6
H
x2
B
M
x6