Audio Pro LIVING LV-HUB Manual Del Propietário página 9

use multiple transmitters and speakers
simultaneOusly witH tHe HOuse cOde 1, 2 Or 3
transmitter: House code 1
speaker: House code 1
By using the House codes (channels) you can share the wireless network for up to two separate
networks. then you can simultaneously play music from various audio sources (from two different
transmitters) to different pairs of living speakers.
adJust vOlume separately
in tHree different ZOnes
in order to be able to have the same music at different volumes in different rooms/areas, you can di-
vide each House code into 3 different volume zones. each zone can have a different volume. this is
very handy if, for example, you want to have one volume level in the living room and a lower volume
in the kitchen. you can have as many living speakers in each zone as you want, or just one pair.
the zone volume is easily controlled with the remote unit.
house coDe 1
speaker and transmitter set to
same house code (channel).
Zone a
2 9
Zone volume
Living LV2e
Note:
1. All LIVING speakers are default Zone A, and volume level 17.
2. Each House Code (1, 2 and 3) can be split into up to 3 zones (A, B and C).
3. You can have as many speakers you like on each House Code, and as many as you want in each zone.
A zone does not have to be one room, can be whole floor in house.
lv-HuB
Zone b
0 8
Zone volume
Living LV2e + LV-SUB
transmitter: House code 3
speaker: House code 3
lv-HuB
1 5
Living LV1 + LV2e + LV33
Zone c
Zone volume
9