Publicidad
Idiomas disponibles
Idiomas disponibles
5.
Insert rubber Vibration Isolators (Goliath, and Goliath Furnace series only) in the most appropriate support receptacles (fig.11). It is not necessary to fill every
receptacle.
6.
Position air handler in the center of the pan. (fig. 12)
7.
For Goliath furnace drain pan installations, refer to manufacturer's instructions regarding clearance specifications. Optional AG-MJ1 Riser Kit may be used to achieve
additional 1" clearance between furnace and pan.
8.
For furnace installations, position the furnace with the heavy side of the unit resting on "back side" of the pan, i.e. the side directly opposite of the float switch. (fig. 11)
IMPORTANT! When brazing, take precautions to prevent pan from coming in contact with torch heat or brazing materials. It's recommended that a damp cloth be placed
under the lines being brazed.
Caution:
(fig. 11)
GOLIATH Horizontal Drain Pan Installation:
(To ensure proper performance of product, instructions must be followed.)
1.
Inspect the drain pan for any shipping damage that may have occurred. If cracked or broken, DO NOT USE.
2.
Make sure drain pan exceeds equipment dimensions by a minimum of 1.5" per side.
3.
Make sure the pan-mounting surface is level and free of any debris.
IMPORTANT! When brazing, take precautions to prevent pan from coming in contact with torch heat or brazing materials. It's recommended that a
damp cloth be placed under the lines being brazed.
4.
Insert rubber vibration isolators (Goliath, and Goliath Furnace series only) in the most appropriate support receptacles (fig.11). It is not necessary to fill every
receptacle.
5.
Position air handler in the center of the pan. Safely hang or place pan on flat level surface. Check your local building codes before installation.
6.
When hanging, pans must be supported equally at least 8" from each end by a support system approved by local code. (figs. 13,14)
IMPORTANT! When brazing, take precautions to prevent pan from coming in contact with torch heat or brazing materials. It's recommended that a damp cloth be placed
under the lines being brazed.
(fig. 13)
GOLIATH FURNACE DRAIN PAN VERTICAL INSTALLATION:
(To ensure proper performance of product, instructions must be followed.)
1.
Inspect the drain pan for any shipping damage that may have occurred. If cracked or broken, DO NOT USE.
2.
Make sure drain pan exceeds equipment dimensions by a minimum of 1.5" per side.
3.
Make sure the pan-mounting surface is level and free of any debris.
4.
Insert one rubber Vibration Isolator at each strategic support location where the appliance makes contact with the drain pan. NOTE: It is not necessary to fill all the
vibration isolator receptacles. (fig. 15)
5.
Position furnace in the center of the pan. (fig. 16)
6.
Refer to manufacturer's instructions regarding "zero clearance" specifications. Optional AG-MJ1 Riser Kit may be used to achieve additional
1" clearance between furnace and pan.
IMPORTANT! When brazing, take precautions to prevent pan from coming in contact with torch heat or brazing materials. It's recommended that a damp cloth be placed
under the lines being brazed.
AquaGuard GOLIATH FURNACE Series Drain Pans are not designed for hanging applications
(fig.12)
(fig. 14)
Publicidad
