Mounting - WEG CPW17 Manual Del Usuario

Installation and Connection

3.2 MOUNTING

The CPW17 can be installed on a 35 mm DIN rail or fixed with screws using the PLMP option. The rear of the
housing has two adjustable latches, one at each end. When closed, they fix the device to the 35 mm DIN rail.
When open, they provide two holes for fixing with screws.
Fixing on 35 mm DIN Rail
1º Open the latches.
2º Put on rail.
3º Close the latches.
Fixing on Optional PLMP
1º Open the latches.
2º Insert the screws.
3º Screw on, lock.
12 | CPW17
Figure 3.1: Mounting