Key Lock; Troubleshooting - PRESIDENT PM-2000 WP Manual Del Usuario

Key Lock

To prevent accidental entries, you can lock the keypad.
1. Press and hold the LOCK key for 1.5 seconds. The unit will
beep two timesto confirm that the keypad is locked with "LOCK"
indication on the display.
2. To unlock the keypad, press and hold the LOCK key again
for 1.5 seconds. The unit will beep twice to confirm that the
keypad is unlocked, and "LOCK" will disappear.
• You can also unlock the keypad by turning the radio Off and
then On again.
• Will not transmit on 5 watt range but will transmit on
the 1 watt range
Cause: Low voltage
ÞRecharge or replace the batteries
• Will not transmit while on the charger
Cause: Low voltage
ÞThe unit is not designed to transmit while on the charger.
The charger does not supply enough power for transmitting
• Battery will not charge
Cause: Charger inoperative
ÞReplace charger. Damage to the charger can be a result
of keying up the radio while on the charger

Troubleshooting

53