Setting the clock
The clock uses a 12-hour digital indication.
Example: To set the clock to 10:08
1
Press (MENU), then press
(DISC/PRESET) (+) or (DISC/PRESET) (–)
repeatedly until "CLOCK-ADJ"
appears.
1 Press (ENTER).
The hour indication flashes.
2 Press (DISC/PRESET) (+) or
(DISC/PRESET) (–) to set the hour.
3 Press (SEEK) (+).
The minute indication flashes.
4 Press (DISC/PRESET) (+) or
(DISC/PRESET) (–) to set the minute.
2
Press (ENTER).
The clock starts. After the clock setting is
complete, the display returns to normal play
mode.
Tip
When CLOCK mode is set to "ON," the time is always
displayed (page 21).
CD Player
CD/MD Unit (optional)
In addition to playing a CD with this unit, you
can also control external CD/MD units.
Playing a disc
(With this unit)
1
Press (OPEN) and insert the disc
(labelled side up).
2
Close the front panel.
Playback starts automatically.
If a disc is already inserted, press (SOURCE)
repeatedly until "CD" appears to start playback.
To
Press
(OFF)
Stop playback
(OPEN) then Z
Eject the disc
(SEEK) (–/+)
Skip tracks
– Automatic
(./>)
Music Sensor
[once for each track]
(SEEK) (–/+)
Fast-forward/
reverse
(m/M)
– Manual Search
[hold to desired point]
(DISC/PRESET) (+/–)
Skip albums*
– Albums selection
[hold to desired point]
* Available only when an MP3 file is played.
To skip tracks continuously, press (SEEK) (+) or
(SEEK) (–), then press again within 2 seconds
and hold.
continue to next page t
11