EGO Power+ LB5750 Manual De Funcionamiento página 14

ASSEMBLING THE BLOWER TUBE
WARNING:
injury, always remove the battery pack from the tool when assembling parts.
1. Align the groove in the tube
with the knob on the blower
housing. Push the tube onto the
blower housing until the latch
snaps into place (Fig. 2 & 3).
2. To remove the tube, press and
hold the tube-release button
to disengage the latch, then
pull the tube straight from the
blower (Fig. 4).
14
56V LITHIUM-ION CORDLESS BLOWER — LB5750
To prevent accidental starting that could cause serious personal
2
3
4
2
1