Connect The Audio Components - Pioneer SX-S30 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

> Before Start
> Part Names

4. Connect the Audio Components

Turntable
a Digital coaxial cable, b Analog audio cable
10
> Install
> Initial Setup
a
b
> Playback
Advanced Setup | Firmware Update | Others
Connecting a CD player
Use a digital coaxial cable to connect a CD player to the
DIGITAL IN COAXIAL jack.
Connecting a turntable
You can also connect a turntable that has an MM-type
cartridge to the PHONO jack.
0 If the turntable has a built-in audio equalizer, connect it to
an AUDIO IN jack other than the PHONO jack. Further, if
the turntable uses an MC type cartridge, install an audio
equalizer compatible with the MC type cartridge between
the unit and the turntable, then connect to any AUDIO IN
jack other than the PHONO jack.
If the turntable has a ground wire, connect it to the SIGNAL
GND terminal of this unit.
CD
E
N

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido