Publicidad
INSTALLATION: Pendant Mount
1. Disassemble the driver box cover. Figure 2-1
2. Loosen the 3/4" plug on the driver box cover with a screwdriver. Figure 2-2
3. Fix the driver box cover on the 3/4 tube. Figure 2-3
4. Attached the safety cord to the hook inside the back of the driver box once mounted. Figure 2-4
5. Connect the input line and ground. lf the fixture is equipped with sensor, adjust the sensor settings. Take relevant waterproof
measures after the wires are connected. Figure 2-5
6. Align the driver box cover with the metal shrapnel inside the driver box and press upward to fasten it together. Figure 2-6
7. Lock the four screws, the product is installed. Figure 2-7
Figure 2-1
Figure 2-2
INSTALLATION: Ceiling Mount with Mounting Plate
1. Loosen screws with screwdriver, and detach the mounting plate. Figure 3-1
2. Align holes of the mounting plate with holes on ceiling. Fix the mounting plate to the ceiling with screwdriver. Figure 3-2
3. Thread the fixture wires through the mounting plate and connect with supply power wires (L/N/G). Hang the hook A in hole B;
hang the hole C in hole D, and secure with mounting screws. Figure 3-3
4. Confirm the installation is secure before turning power on. Figure 3-4
Figure 3-1
Figure 3-3
Adjust the color temperature using the switch.
Move the switch left or right to select the desired color temperature.
Figure 2-3
Figure 2-4
Figure 3-2
Figure 3-4
2
Figure 2-5
Figure 2-6
Figure 2-7
Publicidad
