Steren INV-300 Manual De Instrucciones página 25

Protection against low voltage
The inverter will enter into protection mode (without output voltage) when the DC voltage is lower
than the required. The range of input voltage to the inverter is from 11 to 14 V - - - When the
inverter receive less than 11 V - - - will emits an audible signal.
Protection against overvoltage
The inverter will enter into protection mode (without output voltage) when the DC voltage is
higher than the required. The range of input voltage to inverter is from 11 to 14 V - - -
- Protection against overload:
The inverter will enter into protection mode (without output voltage) when the charge is higher
than the average value of the unity.
- Thermal protection:
The temperature will be very high to the inverter when you use it for a long period of time or if
is not well ventilated it; will enter into protection mode (without output voltage) when the tempera-
ture range reach 65 ºC.
In case that you require to use it for a long time, the charge must be at less 80% of the average,
at the same time correct the ventilation.
25
PROTECTION OF THE INVERTER