With Optional Equipment; Cd/Md Unit; Playing A Cd Or Md - Sony XR-C6200 Manual De Instrucciones

With Optional Equipment

CD/MD Unit

This unit can control a maximum of ten
external CD/MD units in this configuration:
CD unit – maximum of five
MD unit – maximum of five
Any combination up to ten will work.
If you connect an optional CD unit with the
CD TEXT function, the CD TEXT information
will appear in the display when you play a CD
TEXT disc.

Playing a CD or MD

1
Press (SOURCE) repeatedly to select CD
or MD.
2
Press (MODE) until the desired unit
appears.
CD/MD playback starts.
When a CD/MD unit is connected, all the
tracks play from the beginning.
Changing the display item
Each time you press (DSPL) during CD, CD
TEXT, or MD playback, the item changes as
follows:
Elapsed playback time
Disc name* 1
Track name*
Clock
If you have not labeled the disc or if there is no
1
*
disc name prerecorded on the MD, "NO NAME"
appears in the display.
2 If you play a CD TEXT disc, the artist name
*
appears in the display after the disc name.
(Only for CD TEXT discs with the artist name.)
3 If the track name of a CD TEXT disc or MD is not
*
prerecorded, "NO NAME" appears in the
display.
After you select the desired item, the display
will automatically change to the Motion
Display mode after a few seconds.
In the Motion Display mode, all the above
items are scrolled in the display one by one in
order.
$
$
/Artist name* 2
$
3
$
Tip
The Motion Display mode can be turned off. (See
"Changing the sound and display settings" on
page 14).
You can label CD and CD TEXT discs with a
personalized name using the disc memo
function. Refer to "Labelling a CD" (page 17).
However, if you use personalized labels, they
will always take priority over the original CD
TEXT information when such information is
displayed.
Automatically scrolling a disc name
— Auto Scroll
If the disc name, artist name, or track name on
a CD TEXT disc or MD exceeds 8 characters
and the Auto Scroll function is on, it
automatically scrolls across the display as
follows:
• The disc name appears when the disc has
changed (if the disc name is selected).
• The track name appears when the track has
changed (if the track name is selected).
If you press (DSPL) to change the display
item, the disc or track name of the MD or CD
TEXT disc is scrolled automatically whether
you set the function on or off.
1
During playback, press (SHIFT).
2
Press (2) (SET UP) repeatedly until
"A.SCRL" appears.
3
Press (4) (n) to select "A.SCRL-ON."
4
Press (SHIFT).
To cancel Auto Scroll, select "A.SCRL-OFF" in
step 3 above.
Note
For some discs with very many characters, the
following cases may happen:
— Some of the characters are not displayed
— Auto Scroll does not work.
Tip
To manually scroll the long name of an MD or CD
TEXT disc after activating the Auto Scroll function,
press (SHIFT) , then (1) (N) (manual scroll).
15