ASROCK 939SLI32-eSATA2 Manual Del Usuario página 13

2.4 SLI 2.4 SLI 2.4 SLI Operation Guide Operation Guide Operation Guide
2.4 SLI 2.4 SLI Operation Guide Operation Guide
TM TM TM TM TM
This motherboard supports NVIDIA SLI
allows you to install two identical NVIDIA SLI
cards. Currently, NVIDIA SLI
operating system. Please follow the installation procedures in this section.
SLI TM Technology Requirements
1. You should have two identical SLI
certified.
2. Make sure that your graphics card driver supports the NVIDIA
SLI TM technology. Download the latest driver from the NVIDIA website (www.
nvidia.com).
3. Make sure that your power supply unit (PSU) can provide at least the
minimum power required by your system.
Enjoy the benefit of SLI Enjoy the benefit of SLI Enjoy the benefit of SLI
Enjoy the benefit of SLI Enjoy the benefit of SLI
Step 1. Install the identical SLI
because different types of graphics cards will not work together properly.
(Even the GPU chips version shall be the same.) Insert one graphics card
into PCIE1 slot and another graphics card to PCIE3 slot. Make sure that the
cards are properly seated on the slots.
Step2. If required, connect an auxiliary power source to the PCI Express graphics
cards.
Step3. Align and insert the SLI Bridge to the goldfingers on each graphics card.
Make sure that the SLI Bridge is firmly in place.
ASRock 939SLI32-eSATA2 Motherboard
TM
(Scalable Link Interface) technology that
TM enabled PCI Express x 16 graphics
TM technology supports Windows XP and XP 64-bit
TM
-ready graphics cards that are NVIDIA
TM TM
TM TM TM
TM -ready graphics cards that are NVIDIA certified
1 3 1 3 1 3
1 3 1 3